国际动态

ce认证-认证信息-民用爆炸物品欧盟ce认证-en 137

时间:2017-02-16 01:47:44  点击:226次
ce认证-认证信息 民用爆炸物品欧盟ce认证-en 13763 民用爆炸物 雷管和传爆管 要求 本欧洲标准是民用爆炸物品雷管和继爆管系列标准的其中一个部分。该系列标准的其他部分如下: pren

ce认证-pg电子下载

民用爆炸物品欧盟ce认证-en 13763

本欧洲标准是“民用爆炸物品——雷管和继爆管”系列标准的其中一个部分。该系列标准的其他部分如下:

pren 13763-1   第1部分:要求

en 13763-3     第3部分:撞击感度测定

en 13763-4     第4部分:雷管脚线和导爆管的耐磨性能测定

en 13763-5     第5部分:雷管脚线和导爆管的抗切割损坏能力测定

en 13763-6     第6部分:雷管脚线的低温抗裂性能测定

en 13763-7     第7部分:雷管脚线、导爆管、接头、收口处和端部的机械强度测定

en 13763-8     第8部分:普通雷管的抗震性能测定

en_13763-9     第9部分:雷管的抗弯性能测定

en 13763-11    第11部分:雷管和继爆管的抗跌落爆炸能力测定

en 13763-12    第12部分:耐静压性能测定

en 13763-13    第13部分:电雷管的抗静电放电爆炸能力测定

en 13763-15    第15部分:等效起爆能力测定

en 13763-16    第16部分:延期精度测定

en 13763-17    第17部分:电雷管的不发火电流测定

en 13763-18    第18部分:电雷管的串联发火电流测定

en 13763-19    第19部分:电雷管的发火冲量测定

en 13763-20    第20部分:电雷管的总电阻测定

en 13763-21    第21部分:电雷管的击穿电压测定

en 13763-22    第22部分:雷管脚线电容、绝缘电阻和绝缘击穿性能测定

en 13763-23    第23部分:导爆管的爆轰波速度测定

en 13763-24    第24部分:导爆管的不导电性能测定

en 13763-25    第25部分:地表连接器、继爆管和连接配件的(爆轰波)传递能力测定

en 13763-26    第26部分:雷管、继爆管可靠性和安全功能测试所需设备和附件的定义、方法及要求

cen/ts 13763-27    第27部分:电子起爆系统的定义、方法和要求

 
en 13763-2 part 2: determination of thermal stability.
en 13763-3 part 3: determination of sensitiveness to impact.
en 13763-4 part 4: determination of resistance to abrasion of leading wires and shock tubes.
en 13763-5 part 5: determination of resistance to cutting damage of leading wires and shock tubes.
en 13763-6 part 6: determination of resistance to cracking in low temperatures of leading wires.
en 13763-7 part 7: determination of the mechanical strength of leading wires, shock tubes, connections, crimps and closures.
en 13763-8 part 8: determination of resistance to vibration of plain detonators.
en 13763-9 part 9: determination of resistance to bending of detonators.
en 13763-11 part 11: determination of resistance to damage by dropping of detonators and relays.
en 13763-12 part 12: determination of resistance to hydrostatic pressure.
en 13763-13 part 13: determination of resistance of electric detonators to electrostatic discharge.
en 13763-14 part 14: determination of resistance of electric detonators to the influence of radio frequency radiation
en 13763-15 part 15: determination of equivalent initiating capability.
en 13763-16: part 16: determination of delay accuracy.
en 13763-17 part 17: determination of no-fire current of electric detonators.
en 13763-18 part 18: determination of series firing current of electric detonators.
en 13763-19 part 19: determination of firing impulse of electric detonators.
en 13763-20 part 20: determination of total electrical resistance of electric detonators.
en 13763-21 part 21: determination of flash-over voltage of electric detonators.
en 13763-22 part 22: determination of capacitance, insulation resistance, and insulation breakdown of leading wires.
en 13763-23 part 23: determination of the shock-wave velocity of shock tubes.
en 13763-24 part 24: determination of the electrical non-conductivity of shock tubes.
en 13763-25 part 25: determination of transfer capacity of relays and coupling accessories.
this first part, called "type testing", can be performed by yourself, but under the control of one   representative.

 


为什么选择我们

pg电子游戏下载 copyright © 20015-2016 micez all rights reserved     pg电子下载-pg电子游戏下载      上海迈希泽设备检测技术服务有限公司

网站地图